BGDND - ARMSTRONG S 520 ADHESIVE

Export as PDF
Product Identification

Product ID:ARMSTRONG S 520 ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:01-015-4187
MSDS Number: BGDND

Responsible Party
ARMSTRONG WORLD INDUSTRIES INC
W LIBERTY AND CHARLOTTE ST
LANCASTER, PA 17604
US

Emergency Phone: 717-397-0611

Info Phone: 717-397-0611 / FAX 717-396-4426

Cage: 03938

Contractor
ARMSTRONG WORLD INDUSTRIES, INC.
3209 LANCASTER, PA 17604 US

Telephone: 717-396-2328; 717-396-2935

Cage: 03938

Ingredients

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 25.0%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5.0%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 35.0%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:IRRITATION OF NOSE, THROAT & EYS;HEADACHE,
NAUSEA, VOMITING

First Aid

First Aid:INH:REMOVE TO FRESH AIR, USE OF OXYGEN OR MOUTH-TO-MOUTH
BREATHING IF NEEDED. SKIN & EYES:FLUSH W/WATER TO REMOVE MATERIAL &
REMOVAL OF CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:<20F CC
Extinguishing Media:CO*2, DRY CHEMICAL
Fire Fighting Procedures:TREAT ACCORDING TO OSHA REGULATIONS AS FLAM -
CLASS I-B LIQ.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:AVOID BREATHING VAPORS;REMOVE SURCES OF
IGNITION. GOODVENTILATION TO KEEP CONC BELOW 440 PPM(MFG S
SUGGESTED TLV).EXTRA VENTILATION FOR HEAVY SPILLS. AIR-PURIFYING OR
ATMOSPHERE-SUPPLYING RESPIRATORS IF VENT IS NOT ADEQUATE.

Handling

Handling and Storage Precautions:THIS ADHESIVE IS PACKAGED IN PINT,
QUART, HALF-GALLON, & ONE, FIE & FIFTY GALLON CONTAINERS. NORMALLY
STORED ON WOODEN SKID. STORE BELOW 100F.
Other Precautions:NO SPECIAL PRECAUTIONS OTHER THAN TO TREAT AS A CLASS
I-B FLAMMABLE TYPE LIQUID.

Exposure Controls

Respiratory Protection:APROVED CHEMICAL CARTRIDGE RESP FOR ORGANIC
VAPORS
Ventilation:LOCAL:PREFERABLE MECH:ACCEPTABLE.PORTABLE GEN DLTN VENT
Protective Gloves:COTTON
Eye Protection:SPECTACLES METAL/PLASTIC
Other Protective Equipment:SAFETY SHOWER & EYE BATH. LOOPILE GLOVES
ALSO ACCEPTABLE
Supplemental Safety and Health
OTHER INGRED : POLYCHLORO-PRENE RUBBER, 13% ; PHENOLIC RESIN, 9% ;
STABILIZERS, 3% MFR CALCULATES TLV OF HAZ INGRED AS 440 PPM. NIGHT
PHONE : (717) 397-5118

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:>152F
Spec Gravity:0.8400
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STRAW COLORED LIQ W/CHARACTERISTIC KETONE TY ODOR
Percent Volatiles by Volume:75.0

Stability

Stability Indicator/Materials to Avoid:YES
NO REACTIONS W/COMMON MATERIALS & CONTAMINANTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO*2, CO

Disposal

Waste Disposal Methods:LANDFILL OR OTHER SUITABLE MEANS, FOLLOWNG FED,
STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.